when I was away in China I worked on another piece beside The Mermaid. The second piece that I took with me to China was just a piece of wood. I had thought that it would be an animal figure. I was not sure what kind of animal it would be but I knew it would be an animal. After I did some preliminary carving to create a general animal shape it became evident that it would be a dog. My youngest daughter's rottweiler, Diesel, came to mind so I used the rottweiler species as a model for my carving. I found many examples of rottweilers on the internet that helped me as I modeled my piece. It was remarkable in a way, I did most of the roughing out on a rainy Saturday afternoon in my hotel room in Nanning, China. I did the final shaping, sanding and finishing when I returned home to Canada.
After I had finished sanding the dog with the last grade of sandpaper, 800 grit, I decided that the dog needed something to sit on. I found a piece of found wood in my collection of found wood that I thought was perfect. I sanded the base but not to the same luster as the dog. I wanted the base to have a wind swept, water worn look to it. In addition, I thought that the dog required a name. I decided to call him Sea Dog. I roughly carved the name "Sea Dog" into the front of the base to give it a ragged looked then I sanded the entire area where I had carved the name to give it a washed out look.
After treating the base with several solutions of Tung oil cut by thinners I applied a coating of cabinet makers wax to seal and protect the surface.
Now, everything is assembled. Sea Dog is attached to his base with a dowel pin that I glued into a hole in the base and a corresponding hole in the bottom of Sea Dog. i was a little nervous because there is not that much material in the base of Sea Dog and I did not want to break through the wood with my Forstner bit that I used to drill the hole.
The last thing that I did was attach the two glass eyes into place. I used two old pins that had rust heads. I cut the pins short then pushed the pins into Sea Dogs head which firmly seated the glass eyes into position. I do have to say that Sea Dog has a forlorn look sitting on his piece of floating debris.
 |
| Sea Dog ensconced on his bit of driftwood |
 |
| He definitely has a mournful look! |
 |
| You can see how the piece of wood that Sea Dog is sitting on is well worn |
 |
| This end is almost completely eroded |
 |
| I left most of the wood intact in the back, holes and all. |
 |
| some of the letters are clear and prominent. Others have almost completely faded away. |
